Filters
Close

Tripp Lite N784-H01-SCMM Transceiver/Media Converter

Tripp Lite N784-H01-SCMM Transceiver/Media Converter - 1 x Network (RJ-45) - 1 x SC Ports - DuplexSC Port - Multi-mode - Fast Ethernet - 10/100Base-TX, 100Base-FX - Wall Mountable, DIN Rail Mountable, Desktop - TAA Compliant
SKU: 1000180540
Manufacturer part number: N784-H01-SCMM
Free shipping
Manufacturer: Tripp Lite
Old price: $208.00
$130.91
Picture of Tripp Lite N784-H01-SCMM Transceiver/Media Converter

Features | Extends a Network Connection up to 2 km over SC Multimode Fiber Optic Cable

This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.

Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.

LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.

Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.

Works in Tandem with Tripp Lite's N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.

TAA-Compliant for GSA Schedule Purchases
The N784-H01-SCMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Product Information

Transource eSKU1070389393
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN784-H01-SCMM
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN784-H01-SCMM
Product NameN784-H01-SCMM Transceiver/Media Converter
Product TypeTransceiver/Media Converter

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN784-H01-SCMM
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN784-H01-SCMM
Product NameN784-H01-SCMM Transceiver/Media Converter
Marketing Information

Features | Extends a Network Connection up to 2 km over SC Multimode Fiber Optic Cable

This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.

Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.

LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.

Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.

Works in Tandem with Tripp Lite's N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.

TAA-Compliant for GSA Schedule Purchases
The N784-H01-SCMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Product TypeTransceiver/Media Converter
Interfaces/Ports
Total Number of Ports2
Network (RJ-45)Yes
Number of Network (RJ-45) Ports1
Number of SC Ports1
SC Port TypeDuplex
Media & Performance
Media Type SupportedTwisted Pair
Media Type SupportedOptical Fiber
Fiber Mode SupportedMulti-mode
Fiber Optic Wavelength1310 nm
Maximum Distance Supported1.24 Mile
Network & Communication
Ethernet TechnologyFast Ethernet
Network Technology10/100Base-TX
Network Technology100Base-FX
Power Description
Power SourceAC Adapter
Power Consumption1.80 W
Plug/Connector TypeNEMA 1-15P
Physical Characteristics
Form FactorWall Mountable
Form FactorDIN Rail Mountable
Form FactorDesktop
Height0.9"
Width2.9"
Depth4.3"
Weight (Approximate)8.43 oz
Miscellaneous
Package Contents
  • N784-H01-SCMM Transceiver/Media Converter
  • L-shaped Bracket
  • Rubber Foot
  • SC Connector Cap
  • External Power Supply with NEMA 1-15P Plug (Input: 100-240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A)
  • DIN Rail Kit
  • Wall-mounting Hardware
  • Quick Start Guide
Environmentally FriendlyYes
Environmental CertificationRoHS
Environmental CertificationWEEE
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty2 Year

Features | Extends a Network Connection up to 2 km over SC Multimode Fiber Optic Cable

This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.

Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.

LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.

Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.

Works in Tandem with Tripp Lite's N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.

TAA-Compliant for GSA Schedule Purchases
The N784-H01-SCMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Product Information

Transource eSKU1070389393
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN784-H01-SCMM
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN784-H01-SCMM
Product NameN784-H01-SCMM Transceiver/Media Converter
Product TypeTransceiver/Media Converter

Product Specifications

General Information
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN784-H01-SCMM
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product ModelN784-H01-SCMM
Product NameN784-H01-SCMM Transceiver/Media Converter
Marketing Information

Features | Extends a Network Connection up to 2 km over SC Multimode Fiber Optic Cable

This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.

Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.

LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.

Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.

Works in Tandem with Tripp Lite's N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.

TAA-Compliant for GSA Schedule Purchases
The N784-H01-SCMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Product TypeTransceiver/Media Converter
Interfaces/Ports
Total Number of Ports2
Network (RJ-45)Yes
Number of Network (RJ-45) Ports1
Number of SC Ports1
SC Port TypeDuplex
Media & Performance
Media Type SupportedTwisted Pair
Media Type SupportedOptical Fiber
Fiber Mode SupportedMulti-mode
Fiber Optic Wavelength1310 nm
Maximum Distance Supported1.24 Mile
Network & Communication
Ethernet TechnologyFast Ethernet
Network Technology10/100Base-TX
Network Technology100Base-FX
Power Description
Power SourceAC Adapter
Power Consumption1.80 W
Plug/Connector TypeNEMA 1-15P
Physical Characteristics
Form FactorWall Mountable
Form FactorDIN Rail Mountable
Form FactorDesktop
Height0.9"
Width2.9"
Depth4.3"
Weight (Approximate)8.43 oz
Miscellaneous
Package Contents
  • N784-H01-SCMM Transceiver/Media Converter
  • L-shaped Bracket
  • Rubber Foot
  • SC Connector Cap
  • External Power Supply with NEMA 1-15P Plug (Input: 100-240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A)
  • DIN Rail Kit
  • Wall-mounting Hardware
  • Quick Start Guide
Environmentally FriendlyYes
Environmental CertificationRoHS
Environmental CertificationWEEE
Country of OriginTaiwan
TAA CompliantYes
Warranty
Limited Warranty2 Year